Buying electronics, especially large appliances such as refrigerators is a big deal for any Indian household. For most of us it is a matter of pride and a symbol of our prosperity. But in reality refrigerators are more than a symbol. They don’t just improve the quality of the food we consume, but also keep us safe from the dangers of consuming stale food. Therefore, maintenance of refrigerators is important to keep the food fresh and edible and to keep energy wastage in check. Follow these 4 simple steps to keep your fridge running efficiently.
Check the door seals-
The first step in the maintenance of refrigerator is to check the door seals. The door seals, also called the Gaskets, are attached to the edge of your refrigerator door. Their rubber material creates a vacuum when you shut the door and prevent the cool air from seeping out. If the gasket is defective or worn out, warm air from outside can enter making the compressor work harder to maintain the temperature in the fridge. Therefore, it is important to replace the old gaskets with new ones. This will also reduce the energy consumption.
Clean the condenser coils-
Condenser coils, as the name suggests, play the most important role in the functioning of a fridge. The coils apply pressure on the refrigerants flowing through them to condense or cool them and release heat. But as they are attached at the back of the refrigerator and are usually placed against a wall, dust tends to accumulates on them blocking the heat. The compressor then uses more energy to release the heat and wears down easy. A good way to avoid overusing the compressor is to clean the coils with a dry cloth to remove the dust.
Set the fridge at the right temperature-
A refrigerator is the only appliance in a household that runs without pause. Hence, it is vital to minimize the energy consumption to avoid paying long electricity bills. To do this set your fridge and freezer at the right temperature. The suggested temperature for fridge is between 2-5 degrees Celsius and for the freezer it is -18 degrees Celsius. Maintaining the prescribed temperatures ensures that the inside of the fridge remains cooler and the compressor does not over work itself.
In case of power outage keep the door shut to prevent the temperature from rising and ruining the food.
Defrost and clean-
One complaint that everyone has with refrigerators is frost formation in the freezer. Frost formation is the result of the reaction of the warm air from outside with the cold air from inside the fridge. It can occur due to a lot of different reasons such as, leaving the door open for too long, setting the temperature too low or too high, blocking the evaporator coil vents by stacking food etc. You can defrost the freezer manually by turning off the electricity supply. In a self defrosting refrigerator, the process of heating u the coils to melt the ice takes place automatically.
Maintenance of refrigerators with these simple steps allows you to avoid additional electrical consumption. Read here about the difference between inverter refrigerator and conventional refrigerator.
Avail best prices on double door refrigerators at Arzooo.com and save additional money. Demand your price today.